HKS Turbo Timer Type 1
A Turbo Timer is required to help prevent the Turbo bearing and shafts from burning after the vehicle has been used. This is an essential piece of equipment for any turbo charged vehicle to prolong the life of your turbos.
HKS Turbo Timer Type-1 is a full featured Turbo Timer that combines all the features of the Turbo Timer Type-0 with added monitoring and metering functions such as RPM, time to speed/distance, peak hold & warning features and a stopwatch for lap times.
The Turbo Timer Type-1 also includes a speed warning display, a two-stage engine RPM warning display, 0-400 meter acceleration time measurement and stopwatch features for lap timing. The finish is Silver with Blue and Red capable LCD screen.
Full Specifications Follow:
Turbo Timer function
- Manual Mode: can be set in increments of 30 seconds from 0 - 10 mins
- Memory Mode: It will let you select from Memory 1 (1 min) or Memory 2 (3 min) with a push of a button.
- Auto Mode: Will determine the engine's condition from the rpm and automatically set a time between 0-5 mins.
Speed / Speed Peak Hold display function
- Will display the current speed (0 km/h - 390 km/h). It also can display the speed peak.
Speed warning function
- Able to set the warning speed (10 km/h - 390 km/h)
Engine RPM / RPM peak hold display function
- Will display the current rpm ( 100 r/min - 9900 r/min). It can also display the rpm peak.
Engine RPM warning (shift up indicator, red zone indicator) function.
- Will set the warning rpm (1000 r/min - 9900 r/min)
Quarter Mile Time (section time) and Acceleration Interval calculation function
- Auto start or manual start can determine the section times shown . Mid range acceleration can also be determined. 0 - 100m, 0 - 200m, 0 - 400m, 200 - 400m, 0 - 100 km/h, 0 - 150 km/h, 0 - 200 km/h, 50 - 100 km/h, 100 - 150 km/h
Stopwatch function
- Interval measurement and lap time can be measured.
Battery Voltage display / Voltage warning function
- Can prevent a dead battery with the battery voltage display and warning function.
- The fixed minimum warning voltage is 10V and the maximum is 16V.
Large LCD screen panel display
- The backlight in the normal state is a blue LED, but when the timer or warning function is in effect the light will become red.
Safety Circuit function and this Turbo Timer is only for DC12V negative ground vehicles.
Stock Availability: IN STOCK
|
Dealer
Program: |
|
|
|
