HKS Universal Oil Cooler - Type R
There are two different types of oil cooler system. R (Replacement) type is to relocate oil filter. Attachment of S (Sandwich) type is inserted between engine block and oil filter.
Thermostat controls oil temperature
HKS Oil Cooler uses high efficient core. Thus it has thermostat to prevent oil viscosity friction due to over-cool (Except some vehicles). The thermostat responds quick to temperature. When oil temperature is not enough warm, it bypasses core to warm up engine quickly. If oil temperature exceeds thermostat working temperature, it flows oil to core to cool.
Thermostat closing start temperature 70?(±3?)
Thermostat closing complete temperature 80?(±3?)
* Applicable Meter fitting Oil Temp. Fitting M10xP1.0(R TYPE only), M12xP1.25 Oil Pressure Fitting PT1/8
Thermostat has relief function for safety
In case oil pressure has been unusually increased like core is damaged or oil line is stopped, oil is relieved from thermostat and it bypasses core to prevent engine failure and rupture of oil line.
Stainless mesh hose oil line for durability.
To connect surely, US Aeroquip stainless mesh hose and fitting, which are good function, durability and looking proofed by military usage, are used.
R-TYPE SPECIFIC INFORMATION
HKS OIL COOLER KIT R (Replacement) TYPE are designed for each specific vehicles and relocate oil filter for easy maintenance.
- Thermostat controls oil temperature with relief function for safety.
- Attachment is set at the location where stock oil filter was attached and the filter is relocated to another position for easy maintenance.
HKS OIL COOLER relocates oil filter for easy oil filter replacement. Thermostat works against oil temperature just out of engine, which is feature of HKS oil cooler compared with other manufacturers' products, so that it can control correct engine oil temperature. Thermostat responds quickly and the valve has relief function. [Relief valve works if pressure difference is more than 200kPa (2.0kgf/cm2)] All mesh hose and fittings are reliable Aeroquip which is also safe and durable.
Sensor size
- Attachment : M10xP1.0
- Adopter Thermo : M12xP1.25, PT1/8
UNIVERSAL OIL COOLER KIT R TYPE
Length of hose 3m
197×200.9×32, 15 rows (No.134)
- Core has been changed to popular size. (No. 004 --> No. 134)
* It is possible to install to vehicles which thread size of stock oil filter is 3/4-16UNF or M20×P=1.5. (Excluding some vehicles.)
Stock Availability: 5-10 DAYS
